General Motors Tech2 User Guide
Cigarette Lighter Power Cable
This cable contains one fuse and two connectors. It has a cigarette lighter plug at one end
and a power jack at the other. The power jack connects to the Tech2 DLC cable and
carries power to the Tech2 when the selected vehicle adapter does not provide power.
Battery Power Cable
This cable has red and black battery clamps attached to one end and a power jack
attached to the other. The power jack connects to the Tech2 DLC cable and carries current
to the Tech2 when the selected vehicle adapter does not provide power and there is no
cigarette lighter adapter available.
Important: This cable contains two 3-amp fuses. If you need to replace them, use identical
3-amp fuses.
For information on fuse replacement, see Troubleshooting.
NAO Power Supply
North American electrical supply is normally 110 volts. The Tech2 base kit includes an
external AC to DC power supply with 110 V AC/60 Hz input. Output is 12 volts at 1.5 amps.
Universal Power Supply
Wherever 220 current is required, use the 110/220 V AC/50 Hz external AC to DC power
supply. A specific power cord is provided to permit connection to your area's power cord
receptacle.
CAUTION:
To avoid personal injury due to electric shock, use grounded outlet only. The
NAO power supply is for North American use only. The Universal power supply is for use
outside North America. These devices are intended for indoor use only.
Power Cord Plugs
Various types of power cord plugs are available for the Tech2, depending your geographic
location.
36