Requesting Information - GMC Tech2 User Manual

execution of Tech2 remote SPS are shown. The Tech2 screen information is organized
into two sections: Requesting Information and Programming. Follow the steps to perform
remote SPS using the Tech2 scan tool and TIS2Web software.

Requesting Information

1. At the Tech2 title screen, select Enter. To execute the SPS application, press F1 on
the Tech2 keypad or highlight Service Programming System on the Main Menu
screen, then press Enter.
2. At the Request Information screen, press F0 or Enter.
Note: ECU to be programmed must be installed before requesting information.
General Motors Tech2 User Guide
123