Grohe MINTA TOUCH 31359 Installation Manual page 9

GROHE MINTA TOUCH
ARTICLE # 31359
INSTALLATION MANUAL
step
5
5
1
mounting set
step
6
3
3
2
1
3
12.6.13
2
Install the mounting kit to the threaded shank
1
(underneath the worktop).
TIP: Slide the white sleeves (between copper pipe and
flexible hose) one by one through the mounting ring.
Remember to slide back the sleeves into place!
Place the mounting tool on top of the brass threaded
2
shank and turn it clockwise. At the same time keep the
faucet body in position and fixed to the worktop. In
this way, the body is mounted to the worktop.
Mounting the pull-out spray: Grease the rubber ring on
1
top of the brass rod with the included grease.
Install the nozzle on the hose.
2
Run the hose through the spout and then through the
3
brass shank. After this, press the spout carefully over
the shank and to the faucet body.
Clip at base of mounting shank must be fully pushed
down.
9