Advertisement
P IN P FUNCTIONS
The P IN P feature is convenient when you want to watch more than one program at the
same time. You can watch a TV program while viewing other programs from the antenna or
any of the video inputs.
1.
Press the MULTI PIC. button and a sub-picture
will appear in one of the four different modes
(SPLIT, 1, 4 or 12), depending on the last selection
of the P in P mode.
To change the P in P mode, press the M. MODE
to cycle through the four different modes.
If you wish to change the volume or channel
between the main and sub-picture, press the A/B
button. A
selection. Press the CHANNEL UP/DOWN or
VOLUME UP/DOWN button to change channel
or volume for the selected picture.
SPLIT mode
Mode 1
Mode 4
Mode 12
Note: For P in P mode 1 and mode 4 , it is not possible to select the component
input as the sub-picture if the component input is progressive.
CAUTION:
When using Picture in Picture function, the sub-picture should not be left
permanently in one corner of the screen or a "PATTERN BURN" may develop
over a long period of time.
symbol will appear to indicate your
:
The main picture and the sub-pic-
ture split evenly on the screen
: Sub-picture will appear in one
of the three different modes,
depending on the last selection
of the P in P mode.
: The main and 3 sub picture
appear on the right of the
screen.
: In this mode all the active chan-
nels numbers (those set in
memory) will scanned and dis-
played as sub-picture on the
screen.
1
SPLIT mode
MODE 1
1
MODE 4
1
2
3
5
7
6
11
9
10
MODE 12
2
1
2
2
3
2
4
8
12
Advertisement
