Advertisement
2.20 MAGIC FOCUS OPERATION CHECK
Adjustment preparation
(1)
MAGIC FOCUS INITIALIZE OPERATION should be completed.
(2)
Receive the RF signal and set to 100Hz mode.
Adjustment procedure
(1) OPERATION CHECK
START
PUSH "MAGIC FOCUS"
BUTTON
MAGIC FOCUS
OPERATION
GOOD
STOP MAGIC FOCUS
OPERATION by
PUSH MAGIC FOCUS
BUTTON
FINISH
NOTE:
If there is an error, error code (green) appears for about 1 second at bottom right corner.
Refer to 2.14.2 ERROR CODE for the detail.
PAL 100i mode: bar.
PAL 50p mode: dot.
NTSC 60p mode: space.
NO GOOD
REJECT
Retry MAGIC FOCUS
INITIALIZE
MAGIC FOCUS OPERATION
*GOOD (Several windows)
MAGIC-FOCUS
*NO GOOD (Cross pattern)
*NO GOOD (9 cross)
Advertisement
