Sony LF-S50G Operating Instructions page 2

You can also use as a BLUETOOTH® speaker
1 2
After establishing a Wi-Fi connection as described
Establish a Bluetooth pairing.
on the front side, press and hold the (Bluetooth)/
PAIRING button to set your speaker into Bluetooth
From your smartphone or other device's Bluetooth settings, find and select your speaker's
pairing mode.
name.
4-727-167-14(1)
©2017 Sony Corporation
Printed in China
Other useful functions
• Lock buttons
3
Start playback.
Prevent unintentional operations (gestures/
buttons) for 3 minutes.
To unlock buttons, press and hold the HOLD
button again.
• Dimmer
The brightness of the clock display switches
between High  Middle  Low  Off
every time you press this button.
• Switching the clock display (12 hour/24 hour)
Press and hold the DIMMER button.
FAQs
• Is the Bluetooth LED flashing? • Did your speaker turn off?
It means the firmware of your speaker has been Press the RESTART button.
updated; it will stop flashing on its own.
HOLD button
Press and hold
• Can you not operate your speaker or connect to • Do you want to turn off the MIC?
a Bluetooth device? Press the button.
A Wi-Fi connection is required, so check whether
the speaker is connected to one.
• Do you want to reset your speaker?
Press and hold the
four status LEDs light in orange.
DIMMER button
Press
About Help Guide (web manual)
The Help Guide describes the features of the speaker and how to use in detail. You can
view the Help Guide on a smartphone or computer.
RESTART button
Press
button until the
http://rd1.sony.net/help/speaker/lf-s50g/h_zz/
Parts and Controls
 
Gesture LED N-mark
Touch here when connecting by One-touch (NFC)

Status LEDs (for Google Assistant)

(microphone off) button

Clock display/Volume display

(Bluetooth)/PAIRING button

Built-in microphones

DIMMER/RESTART button

Gesture control sensor

HOLD button

Bluetooth LED

DC IN connector