Oki pro920TW User Manual page 32

2. Fold out the paper support section and swivel out the
extension supports (2).
3
3. Adjust the paper guides (3) to the size of the paper being
used.
4. Fan the paper to be loaded then tap the edges of the stack on
a flat surface to make it flush.
NOTE
It is recommended to load one sheet of transparency film at a time
into the multi-purpose tray, as transparency film easily can cause
paper jams or faulty paper feeding.
5. Load the paper.
• For single-sided printing on letterhead, load the paper into
the multi-purpose tray with pre-printed side up and top
edge into the printer.
• Do not leave space between the paper and the guides.
pro920WT User's Guide> 32
2