Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Features & Benefits INDOOR OUTDOOR SENSOR I.D. ABC 12 13 FRONT BACK 1. Current Temperature 9. SELECT Button Press to manually toggle between 2. INDOOR Indicator indoor and outdoor readings, or Indicates indoor (display) readings enable Auto-Cycle mode. are being displayed. 10.
SETUP Install or Replace Batteries AcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. The outdoor sensor requires lithium batteries in low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC.
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display and wireless sensor are critical to the accuracy and performance of this product. Display Placement Place the display in a dry area free of dirt and dust. Display...
OPERATION Display Modes AUTO CYCLE: By default, the unit is in AUTO-CYCLE mode. In AUTO-CYCLE mode, the display will automatically cycle through current readings for INDOOR (display) and OUTDOOR (sensor) temperature and humidity. To enter AUTO-CYCLE mode, press and release the “SELECT” button on the back of the display until the icon appears on the screen.
(1) This device may not cause interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device. Rely on premium home automation by AcuRite if you’re looking for quality and efficiency.