Fcc Warning Message - Current Daintree WOS2-WM Installation Instructions Manual

Wireless Occupancy Sensor, Wall
Mount (WOS2-WM)

FCC warning message

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and radiates radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment
and receiver;
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected;
• Consult the dealer or an experienced radio/TV
technician for help.
Industry Canada (IC) Warning
Message
Product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
This device must accept any interference received,
including interference that may cause undesired
operation.
Call 1 888 694 3533
GE is a trademark of the General Electric Company. All other trademarks are the property of their respective owners.
Information provided is subject to change without notice. All values are design or typical values when measured
under laboratory conditions. Current and GE Lighting are businesses of the General Electric Company. © 2017 GE
products.currentbyge.com
(2) Lithium-thionyl chloride batteries
Power Supply
(Li-SOCl2) AA 3.6V (included)
Battery Life 5 years (normal operation)
Radio Properties
2.4 GHz, +7dBm transmit power
Sensor Coverage
110°, 11 m/36 �� (WOS2-WM-W)
(maximum)
20°, 30 m/98 �� (WOS2-WM-L)
30 seconds (fixed), additional delay time
Off-Delay Timer
configurable in CSM
14°F to +122°F (-10°C to 5 0°C)
Operating Environment
Indoor use only
FCC Part 15 B, FCC ID: NRH-ZB-Z100B
Compliance
ICES/NMB-003 Class B, IC: 8984A-Z100B
(2) Screw holes on swivel mount bracket;
Mounting
wall (or ceiling) mount
3.6" W x 2.8" H x 3" D
Dimensions
(92mm W x 70mm H x 77mm D) Weight
(without battery): 3.32 oz. (94g)
5