E) Setting The Program Schedule; F) Setting The Clock; G) Restore Defaults; H) Display Version - PFTAS NB-PA-01-FS User Manual

Pellet Heater User Manual - NB-Series

e) Setting the program schedule

Each hour of each day of the week can be set to be ON or OFF allowing simple or complex schedules
to be programmed which operate when the Auto setting is activated. EG - Automatically turn ON
and stay on between 6am and 8am then again from 4pm to 10pm Monday to Friday and OFF
Saturday and Sunday so that MANUAL operation is used as required on those days.

f) Setting the clock

The hour, minuets, day, month and year can be set to local time. Please adjust as required for day
light savings time.

g) Restore defaults

Select NO to use the changes you have just made or select YES to return to the previous defaults.

h) Display Version

The Firmware and Software versions are displayed for the Controller and Display modules.

i) Exit setup

Press the spanner button at any time to exit the setup programming mode.
Pellet Fires Tasmania – V02.02-18/7 14 www.pftas.com.au