Subscribe to Our Youtube Channel
Related Manuals for PFTAS NB-PA-01-FS
Summary of Contents for PFTAS NB-PA-01-FS
- Page 1 V02.02 Pellet Heater User Manual - NB-Series PFTAS Pty Ltd Pellet Fires Tasmania 7/1/2018...
-
Page 2: Table Of Contents
Cleaning the fire pot before and after each lighting ............. 16 Cleaning the combustion chamber ..................17 Cleaning the flue ........................17 Frequency of Component Cleaning ..................17 Cleaning the Ash Drawer ....................... 17 Troubleshooting ........................18 Pellet Fires Tasmania – V02.02-18/7 www.pftas.com.au... -
Page 3: Introduction
As the heat output of various quality wood pellets differs, so will the performance and heat output of the pellet heater. We recommend the use of pellets that meet or exceed these standards. Please use a recommended pellet type. Pellet Fires Tasmania – V02.02-18/7 www.pftas.com.au... - Page 4 PELLET FEED RATES: Due to different fuel densities and sizes, pellet feed rates may vary. This may require an adjustment to combustion fan’s speed or to the auger feed trim setting on low (contact PFTAS). Pellet Fires Tasmania – V02.02-18/7...
-
Page 5: Specifications
Efficiency Hopper Weight Model Description Area Kg/Hr running Size (W*H*D) Heat Kw (Min/Max) watts American Styles Grace Pellet NB-PA-01-FS 0.6/1.6 <100 648*555*530 Heater - Console Grace Pellet NB-PA-FS 4/13 1.0/2.3 <100 670*770*610 Heater - Console Grace Pellet Out-1000*935*280 NB-PA-01 0.6/1.6 <100... -
Page 6: Pellet Fuel Consumption
(better insulation, reduce draughts etc). If your home is too hot on the lowest setting (ECO) then turn the heater off manually or contact Pellet Fires Tasmania Customer Service for more information and assistance. Pellet Fires Tasmania – V02.02-18/7 www.pftas.com.au... -
Page 7: Mechanical
This switch is installed on the vent pipe and turns the convection blower on when the heater is above 40 degrees. ROOM THERMOSTAT Measures room temperature and adjusts the heat output. Will switch between ECO (low) and what ever power setting is chosen (P1 … P4). Pellet Fires Tasmania – V02.02-18/7 www.pftas.com.au... -
Page 8: Warranty
Heater, that it will be free from defect in material and workmanship under normal use in accordance with the Owner's Manual. PFTAS shall at no cost to the consumer, upon such defects occurring, at its option repair or replace such faulty materials or workmanship. -
Page 9: Users Guide
10 secs of inactivity Protection Temp (P) Skip the process Thermostat Press Temperature to stabilization & hold 3 seconds Press Increase or Shutdown process & hold decrease the commences 3 seconds set point Pellet Fires Tasmania – V02.02-18/7 www.pftas.com.au... -
Page 10: Operating Instructions - Detailed
Message, LIGHTING will be shown next, (Electric igniter heats up and lights the pellets) Message, STABILIZATION will be shown next (Normal operation, pellets are fed as per the power setting and the room fan turns on once the heater reaches operating temperature. Pellet Fires Tasmania – V02.02-18/7 www.pftas.com.au... -
Page 11: B) Shutdown
Pellet feed rate can be changed from a Maximum P1 (100%) to a Minimum P4 (ECO) Pressing the key the feed quantity can be changed; the display shows the selected power. MINIMUM POWER P4 LOW POWER P3 MEDIUM POWER P2 MAXIMUM POWER P1 Pellet Fires Tasmania – V02.02-18/7 www.pftas.com.au... -
Page 12: D) Eco Stage
The number with “R” is the temperature for room. The number with “S” is the temperature for the Smoke • The number with “P” is the temperature for the Protection. • o For example: The room temperature is 13 degrees. Pellet Fires Tasmania – V02.02-18/7 www.pftas.com.au... -
Page 13: Setup - Reference Guide
(Y)es or (No) Minuets Press Version V02.02 Increase or Press decrease the Date Repeat Increase or Press decrease the Month Increase or Press decrease the Year Exit Setup Press anytime to Repeat Exit setup Pellet Fires Tasmania – V02.02-18/7 www.pftas.com.au... -
Page 14: Setup Instructions - Explained
Language Select the language of choice. Default is English. Pellet Fires Tasmania – V02.02-18/7 www.pftas.com.au... -
Page 15: E) Setting The Program Schedule
Select NO to use the changes you have just made or select YES to return to the previous defaults. h) Display Version The Firmware and Software versions are displayed for the Controller and Display modules. i) Exit setup Press the spanner button at any time to exit the setup programming mode. Pellet Fires Tasmania – V02.02-18/7 www.pftas.com.au... -
Page 16: Maintenance Guide
In the event of multiple error messages (eg E1 and E5), it may be necessary to power off the heater at the power point and then clear the error code. Pellet Fires Tasmania – V02.02-18/7 www.pftas.com.au... -
Page 17: Maintenance
Correct daily cleaning will allow the pellet heater to burn properly with high performance avoiding problems in the long term which could require the intervention of a technician to repair the pellet heater. Pellet Fires Tasmania – V02.02-18/7 www.pftas.com.au... -
Page 18: C) Cleaning The Combustion Chamber
The ash drawer must be cleaned every 2 days, depending on the length of time the stove is used and the type of pellet used. To access the drawer, open the door and extract the ashes drawer. Pellet Fires Tasmania – V02.02-18/7 www.pftas.com.au... -
Page 19: Troubleshooting
6. Heater switches Heater has not reached Clean out the burn pot and start again. after 15 minutes. operating temperature. If fails a second time contact customer support. Pellet Fires Tasmania – V02.02-18/7 www.pftas.com.au... - Page 20 The NB-Series of pellet heaters have been designed and built for the European domestic pellet heating market and are imported, distributed, and supported in Australia by PFTAS Pty Ltd, trading as Pellet Fires Tasmania. Contents of this manual may be updated without notice. For the latest version of this manual please refer to our website www.pftas.com.au...
Need help?
Do you have a question about the NB-PA-01-FS and is the answer not in the manual?
Questions and answers