Hoshizaki DCM-270BAH-OS Manual page 2

oshizaki
DCM-270BAH-OS SANITARY CUBELET ICE MACHINE/DISPENSER
A I R - C O O L E D
Water Temp˚ F.
50˚
70˚
288
80˚ 254
90˚ 224
U T I L I T Y C O N S U M P T I O N
KWH per
Model Number
100 LBS.
90/70 70/50
7.3 5.3
DCM-270BAH-OS
S P E C I F I C AT I O N S
Model Number
Condenser
Air-Cooled
DCM-270BAH-OS
N/A
SD-270
• Separate ICE and WATER Dispensing
• LED Remote Sensor for hands-free
operation.
Flaked ice compacted into cubelets by extruding head cutter
and stored in an insulated bin with continuous agitation during
dispensing and direct dispensing auger
Cutter
Extruding
Head
• Circuit breaker or fuse protects gear motor from overload.
• Gear motor runs one minute after termination of ice making
to clear all ice from evaporator.
Refrigerant Tubing
Freezing Cylinder
Stainless Steel Auger
Insulation
Gear Motor
Gear Train
E L E C T R I C A L & P L U M B I N G / D C M - 2 7 0 B A H - O S
• 115V/60/1
• 15 amp cord connection
HOSHIZAKI AMERICA, INC.
©
618 Hwy. 74 S., Peachtree City, GA 30269
DIMENSIONS
W x D x H
DCM-270BAH-OS • Hands-free ice and water dispenser
16 9/16 x 24 3/16 x 31 7/8*
*with 4" legs
SD-270 • Optional stand with locking door
16 x 24 x 35
1/2 3/16
70˚ 90˚
276 265
243 233
220 205
Power Switch
GAL per
100 LBS.
90/70 70/50
12.0 12.0
Shipping
Amperage
Weight
8.5 166 lbs.
N/A 89 lbs.
Bin
Evaporator
O P E R AT I N G L I M I T S
• Ambient Temp Range
• Water Temp Range
• Water Pressure
• Voltage Range
3 15/16"
1/2"
(100mm)
(13mm)
13 5/16"
(338mm)
16 9/16"
(420mm)
FRONT VIEW
Power Supply Cord
13/16"
(21mm)
45 - 100˚F
45 - 90˚F
10 - 113psig
104 - 127V
TEL 1-800-438-6087 FAX 1-800-345-1325
OPTI-SERVE SERIES
9 lb. Capacity Built-in Bin
Ice Sensor
Water Sensor
1 3/16"
(30mm)
3 15/16"
(100mm)
1 1/4"
(31mm)
3/4" Water Drain Outlet
1/2" Water Supply Inlet
6 5/8"
6 5/8"
(169mm)
(169mm)
BOTTOM VIEW
6" Adj.
Legs
SD-270
S E RV I C E
• Panels easily removed and all components
accessible for service.
• Removable/cleanable air filter.
www.hoshizaki.com
23 9/16"
(599mm)
5 1/4"
(134mm)
15 15/16"
(405mm)
24 1/8"
(613mm)
SIDE VIEW
Printed in U.S.A.