Advertisement
Quick Links
Introduction
The OFC‐1000PSE is an electrical copper to optical fiber
Gigabit Ethernet solution designed to make conversion
between 10/100/1000Base‐T and 1000Base‐SX/LX with SFP
module. The OFC‐1000PSE complies with IEEE802.3af Power
Over Ethernet standards and has a built‐in AC power supply.
This PoE (Power over Ethernet) media converter is a Power
Sourcing Equipment (PSE) which combines data received
over a TP link with 48VDC power, providing power to
IEEE802.3af powered device (PD) over the existing CAT5e or
CAT6 UTP cable. Other features include Link Fault Pass
through (LFP), Store and Forward Switching, and auto or
forced mode setting for copper Ethernet.
Features
10/100/1000Base‐T to 1000Base‐SX/LX SFP
IEEE 802.3af‐2003 PSE (power sourcing equipment)
Auto‐negotiation or forced mode on UTP
Auto MDI/MDIX
Store and Forward Switching Mechanism
Forward 1632 bytes (max.) packet
Supports 4k MAC address
Supports 256K bytes packet buffer
Supports Link Fault Pass through (LFP) function
For applications including IP Cameras, IP phone and wireless
Access Points that require less than 15W
sales@ctcu.com
Panel
10/100/1000T GbE Port with PSE 48V, 15W
LED Indicator (SPD, Duplex, LFP)
1000X SFP Cage (shown with SFP)
•
Figure #1. Front Panel of OFC-1000PSE
•
Figure #2. Rear Panel of OFC-1000PSE-AC
•
Figure #3. Rear Panel of OFC-1000PSE/A
sales@ctcu.com
Dip Switch
CTC Union Technologies Co., Ltd.
w w w . c t c u . c o m
User Guide
Gigabit Ethernet PSE Fiber Media Converter
•OFC-1000PSE-AC
•OFC-1000PSE/A
sales@ctcu.com
Specifications
Standards
IEEE802.3 10Base-T, IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T, 802.3z 1000Base-SX/LX
IEEE802.3x flow control
IEEE802.3af -2003 PSE (Power Sourcing Equipment)
10/100/1000Base-T RJ-45 Connectors
One RJ-45 connector is provided for connection to either MDI-X (to PC) or
MDI (to HUB) equipment. Utilizing auto MDI/MDIX allows all UTP
connections to be made using only a common straight-through UTP cable.
PSE Output Power
Class 0 : 15.4W , Class 1 : 4W, Class 2 : 7W, Class 3 : 15.4 w
RJ-45 Pin Assignment
Pin 1
TX/RX A+
V+
Pin 2
TX/RX A -
V+
Pin 3
TX/RX B+
V -
Pin 4
TX/RX C+
Fiber Optic Connectors
One SFP cage is provided for SFP fiber optic transceiver.
OFC-1000PSE with SFP requires duplex LC connector cable
SFP for single fiber BiDi may have single LC or SC connector.
Environment
Temperature: Operating -- 0 to 50℃, Storage - 0 to 70℃
Humidity: -- 10 to 90%, (non-condensing
OFC-1000PSE-AC : Internal AC 100 ~ 240VAC ±10%
Power :
OFC-1000PSE/A : External DC 48V in AC adapter
Dimensions: 147 x 162 x 36 (D x W x H)mm
Net Weight: 405g
sales@ctcu.com
Pin 5
TX/RX C -
Pin 6
TX/RX B -
V-
Pin 7
TX/RX D+
Pin 8
TX/RX D -
)
V1.1
Advertisement
Related Manuals for CTC Union OFC-1000PSE-AC
Summary of Contents for CTC Union OFC-1000PSE-AC
-
Page 1: User Guide
Figure #2. Rear Panel of OFC-1000PSE-AC Environment Temperature: Operating -- 0 to 50℃, Storage - 0 to 70℃ Humidity: -- 10 to 90%, (non-condensing OFC-1000PSE-AC : Internal AC 100 ~ 240VAC ±10% Power : OFC-1000PSE/A : External DC 48V in AC adapter •... -
Page 2: Led Indicators
LED Indicators Dip Switch Setting 100/1000 The OFC‐1000PSE is provisioned through the use of a single 4‐pole DIP (Dual Inline Package) switch located on the front FULL panel. Setting a switch down places it in the ON position. FX LNK UTP LNK Switches 1&2 provide setting auto‐negotiation (Nway) or manual forced speed of 10, 100 or 1000. Default is all OFF. Function State Status Switch 3, when ON (down), sets the forced Half Duplex for either 10Base or 100Base, or sets Full Duplex when OFF (up). Converter Power on Power Power off Switch ...