Audio; Lock (Parental Control); Initial Setting The Area Code - LG DM8360K Owner's Manual

20 System Setting

Audio

DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this effect.
Vocal
Select [On] to mix karaoke channels into normal
stereo.
This function is effective for multi-channel karaoke
DVDs only.
HD AV Sync
Sometimes Digital TV encounters a delay between
3
picture and sound. If this happens you can
compensate by setting a delay on the sound so that
it effectively 'waits' for the picture to arrive: this is
called HD AV Sync. Use WS (on the remote control)
to scroll up and down through the delay amount,
which you can set at anything between 0 and
300ms.
Semi Karaoke
When a chapter/ title/ track is fully finished, this
function shows the score in the screen with a fanfare
sound.
[On]
When you finished singing a score will appear on
the screen.
[Off]
Fanfare and score do not appear on the screen.
,
Note
y DVD, DVD Karaoke discs with more than 2
tracks are available discs for the this function.
y When you watch movies, "off " the Semi
Karaoke at the SETUP menu or enjoy it
without connecting the MIC if the fanfare or
score appears during changing a chapter.
y This function operate on the DVD/CD mode.
y The Semi Karaoke function is available only
when a microphone is connected.
y If you do not use the microphone, turn down
the volume and disconnect the microphone.

Lock (Parental Control)

Initial Setting the Area Code:

When you use this unit for the first time, you have to
set the Area Code.
1. Select the [Lock] menu and then press D .
2. Press D .
To access the [Lock] options, you must input the
password you have created. Input a password
and press OK / SET on the unit or b OK on the
remote control. Enter it again and press
OK / SET on the unit or b OK on the remote
control to verify. If you make a mistake before
pressing OK / SET on the unit or b OK on the
remote control, press CLEAR.
3. Select the first character using WS buttons.
4. Press OK / SET on the unit or b OK on the
remote control and select the second character
using WS buttons.
5. Press OK / SET on the unit or b OK on the
remote control to confirm your Area code
selection.
Rating
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
1. Select [Rating] on the [Lock] menu then press D .
2. Input a password and press OK / SET on the unit
or b OK on the remote control.
3. Select a rating from 1 to 8 using the WS
buttons.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select unlock, parental control is not active
and the disc plays in full.
4. Press OK / SET on the unit or b OK on the
remote control to confirm your rating selection.