Table of Contents
Advertisement
Before Operation
Mini Glossary for Audio Stream &
Surround mode
Allows you to enjoy 5.1(or 6) discrete channels of high
quality digital audio from DTS program sources such as
discs, DVD and compact discs, etc.bearing the trademark.
DTS Digital Surround delivers up to 6 channels of
transparent audio(which means identical to the original
masters) and results in exceptional clarity throughout a
true 360 degree sound field. "DTS" and "DTS Digital
Surround" are registered trademarks of Digital Theater
Systems, Inc.
The Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital
program source. If you play DVDs with "
can enjoy even better sound quality, greater spatial accura-
cy, and improved dynamic range.
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and double-D symbol are trademarks
of Dolby Laboratories.
II
Dolby Pro Logic II creates five full-bandwidth output
channels from two-channel sources. This is done using
an advanced, high-purity matrix surround decoder that
extracts the spatial properties of the original recording
without adding any new sounds or tonal colorations.
MOVIE mode:
The Movie mode is for use with stereo television
shows and all programs encoded in Dolby Surround.
The result is enhanced soundfield directionality that
approaches the quality of discrete 5.1-channel sound.
MUSIC mode:
The Music mode is for use with any stereo music
recordings.
MATRIX mode:
The Matrix mode is the same as the Music mode
except that the directional enhancement logic is
turned off. It may be used to enhance mono signals
by making them seem "larger." The Matrix mode may
also find use in auto systems, where the fluctuations
from poor FM stereo reception can otherwise cause
disturbing surround signals from a logic decoder. The
ultimate "cure" for poor FM stereo reception may be
simply to force the audio to mono.
BYPASS
Outputs the sound from the front left and right speakers
and subwoofer.
10
Sound Mode
You can enjoy surround sound simply by selecting one
of the pre-programmed sound fields according to the
program you want to listen to.
When DVD is inserted
You can change the Digital Audio Output mode by
pressing the AUDIO button on the remote control during
playback. Although the DVD contents differ from disc to
disc, the following explains the basic operation when
this feature is used.
a) After you select 2 channel (For example
3 ENG
) by pressing AUDIO button, press SOUND
D
2 CH
button repeatedly.
The sound mode of DVD is changed on the TV screen as
the following order.
Bypass
" mark, you
MATRIX
b) After you select 5.1 channel (For example
4 ENG
) by pressing AUDIO button, press SOUND button.
DTS
5.1 CH
- "
" indicator will be displayed on the TV screen.
When CD is inserted
Each time you press SOUND button, the sound mode
of CD is changed on the display window as the follow-
ing order.
→
Bypass
DD PL II 1
For your reference
• Intial sound of DVD function is BYPASS.
• You can identify the encoding format of program
software by looking at its packaging.
- Dolby Digital discs are labeled with the
- Dolby Surround encoded programs are labeled with
the
- DTS Digital Surround discs are marked with DTS.
ote
When you play sound tracks with 96kHz sampling frequency,
the output signals will be converted to 48kHz (sampling fre-
quency).
DVD
CD
→
→
MOVIE
...
→
Bypass
→
→
→
Studio
Club
Hall
Thea. 1
→
→
DD PL II 2
DD PL II 3
logo.
2 ENG
or
D
2 CH
→
MUSIC
or
1 ENG
D
5.1 CH
→
→
Church
→
Bypass...
logo.
Advertisement
Table of Contents
