Method to operate and select air volume – Ventilation single operation
It is a function to cool and refresh the indoor air using general ventilation product..
Ventilation single operation
Press
button on the remote
1
controller.
Pressing
button will change
2
the ventilation mode.
Ventilation
Remote controller
mode
display
Heat
Circulate indoor air without loss of heat
exchange
Directly circulate indoor air without going
Normal
through heat exchanger
Circulate indoor air with automatically
Automatic
comparing indoor and outdoor air
In the case of heat exchange mode, the display is
shown as below.
→
→
→
→
Pressing
button will change
3
the strength of the wind
- Pressing the button can select
from 'weak → strong → very
strong'.
- If CO
sensor is installed, it can select from
2
'weak → strong → very strong → automatic'.
Test running
Contents
→
→
→
Installation manual 21