At Commands; Direct Commands - Diamond SupraExpress 56e Manual

A
D C
IRECT OMMANDS
The following commands are issued exactly as shown below. They are not preceded by AT.
A/ Re-execute Last Command
Re-execute the last command issued, either by you or by your software.
+++ Escape Code
Escape Code per setting in Register S2. Default is ANSI character 43, the "+" symbol. Must be
preceded and followed by a brief period of no transmission (i.e., a 2-second pause).
[CR]Carriage Return
Terminate connection attempt in progress during the dialing or protocol negotiation process.
AT C
OMMANDS
The following commands are preceded by the letters AT. The first command, for example, is issued
as ATA.
A Answer Phone Line
B BELL/ITU Protocol Compatibility
Selects ITU protocol and V.22 at 1200 bps.
BØ
B1 Selects Bell 212A at 1200 bps.
D Dial Command Modifier
Dials any mixed string of dialing commands. (See Dialing.) If a number is blacklisted or
delayed, this command displays BLACKLISTED or DELAYED rather than dialing. This may also
happen if the S1 Register has not yet cleared.
E Command Echo
Controls the echo of characters sent to your modem from your computer when modem is in
command state.
Turns off echo. If you see two characters for every one you type (i.e., AT looks like
EØ
AATT), issue ATE.
E1 Turn on echo (default). If your computer does not display the characters you type,
AT C
OMMANDS
55