1. AC fuse holder
2. AC Input receptacle
3. Speaker outputs
4. Balanced Inputs
** OPTIONS AVAILABLE FOR THE Reference 220M AMPLIFIER
1. AC fuse holder -
2. AC Input receptacle - For attaching the supplied AC power cord to the
3. Speaker outputs -
4. Balanced inputs -
Rear Panel View
5. RCA input (unbalanced)
6. Level controls**
7. Amplifier control muting input/output
Rear panel description
Holds the AC Line fuse. This fuse is an 12 Amp / 250 Volt
Slow Blow fuse. Replace with same type and value fuse
only.
amplifier.
For connecting the speakers to the amplifier. Explained
further on page 7.
For connecting Balanced signal patch cables (XLR).
Explained further on page 8.
Page 4
13005 rev 0004