Disassembly & Reassembly - Samsung AQ17KS Service Manual

3 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the
AQ17KS monitors.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling
these components.
3-1 Disassembly
Cautions:1. Disconnect the monitor from the power source before disassembly.
2. To remove the Rear Cover, you must use the special opening jig tool.
3-1-1 Cabinet Disassembly
1. With a pad beneath it, stand the monitor on its
front with the screen facing downward and
the base closest to you. Make sure nothing will
damage the screen.
2. Remove the Stand from the monitor.
(Refer to Stand manual)
3. Squeeze the hold-snap on bottom of the
monitor using your hand.
Figure 3
4. Insert the Opening jig into the groove then
release the hold-snap.
Figure 4
AQ17KS
5. Incline the monitor by lifting the rear of the
monitor..
Figure 1
6. Push the Opening jig each groove along the
top of the monitor till it makes a "ttak" sound.
(2 grooves : Left and Right, Make sure each
snap is disengaged.)
Figure 2
3-1