Advertisement
Quick Links
Technical information XL13.2
Material
Size (d x l)
Weight above water
Weight under water
Hyperbaric pressure test
Standard light power
Standard reflector
Optional light power
Battery pack
Capacity at 100% power,
(temperature 20 C)
Securities
Electronic circuit
Charger
*
Anodised in accordance with American Military Standard MIL-A-8625-E type 3 class 2 and impregnated with Teflon.
Warranty
The Metalsub torch warranty will start on the date of purchase. The warranty period is 24 months and will only count when the torch has been used in the
way the manufacture advises and has explained in the outlines. During this warranty period we will repair all problems that are caused by manufacture
related mistakes. We will take no responsibility for damage that is done through misuse or normal wear and tear of the Metalsub dive light for whatever
reason. The light bulb itself and the o-rings has no warranty! The warranty period of the battery pack is 12 months from production date. Until 36 months
from purchase we offer a fair settlement.
We will give no warranty when any person has carried out any repair or rebuilding on our products by themselves!
All goods being returned for warranty must be returned prepaid, sufficiently packed under the owners risk to :
dealer:
Metalsub the Netherlands, 2008
Aluminium, anodised, Teflon coated
65 mm x 247 mm
1450 gram
600 gram
25 Bar
50 Watt Xenophot bulb
Aluminium, 10 (spot)
20 – 35 Watt Halogen / 24 Watt LED module
Sanyo NiMH 13,2 Volt - 4,5 Ah
50 Watt Halogen Xenophot appr. 60 minutes
24 Watt LED module appr. 75 minutes + 8 hours
- electronic thermal 50 C
- mechanical thermal protection 50 C
- overpressure valve for any battery gas leakage
- lock button on switch
3 step variable light power 100%-75%-50%
Depth discharging protection; Constant light power during
discharging cycle
SOS-signal
Battery capacity indication
Temperature charge controller 42 C
MP1100 (standard)
External charging by two charging plugs
Suitable for NiMH cells
Fitted with a Delta-V charge controller, detects when the
battery pack is full
Automatic over switch to pulse charging
charge time 5 hour
Standard supplied with cord
Several AC cords available:
EURO/AUS/UK/USA cord
MANUAL
METALSUB - HANDLAMP XL13.2
The Netherlands
08
Advertisement
Related Manuals for METALSUB XL13.2
Summary of Contents for METALSUB XL13.2
- Page 1 Warranty The Metalsub torch warranty will start on the date of purchase. The warranty period is 24 months and will only count when the torch has been used in the way the manufacture advises and has explained in the outlines. During this warranty period we will repair all problems that are caused by manufacture related mistakes.
- Page 2 - To prevent loss always clip or tie the lamp to the B.C. with a Lanyard (Metalsub Lanyard Part No. 6020) Removal of the halogen light unit/LED unit - Always use the supplied charger Turn the lamp ring on the front side of the lamp to the left.
Need help?
Do you have a question about the XL13.2 and is the answer not in the manual?
Questions and answers