Table of Contents
Advertisement
Your InAlto BBQ
SPECIFICATIONS
IBBQBI4B
BUILT IN INSTALLATION
WARNING
THE CONSTRUCTION OF THE ENCLOSURE AND INSTALLATION OF THE BBQ SHOULD BE CARRIED OUT ONLY BY
AUTHORISED PERSONS.
THE BARBECUE MUST ALSO BE SECURED TO THE ENCLOSURE TO PREVENT IT BEING PULLED OUT AND STRAINING
THE GAS CONNECTIONS.
► Please follow these instructions for installation. any other requirements of AS/NZS 5601.1, local authority, or relevant statutory
regulations, and ensure adequate ventilation (per page 2).
► The minimum clearance of the sides of the BBQ to walls needs to be 50mm.
► DO NOT block any ventilation slots of the BBQ below or behind.
► The enclosure material for the cutout must not be combustible.
► Do Not place gas cylinder underneath the barbeque, keep required clearance and ensure there is 'permanent separation', i.e. no line
of sight between the gas cylinder and combustion area. If the gas cylinder is enclosed, ensure adequate high and low ventilation (200
square cm each) as required by AS/NZS 5601.1.
► Ensure 150mm clearance to combustibles underneath barbecue fat tray.
USER MANUAL
PAGE 08
Advertisement
Table of Contents
