General Do's And Don'ts - Pureit Advanced RO plus MF Instruction Manual

22

GENERAL dO's ANd dON'Ts

01. Please dispose the used consumables like Pre-Sediment Filter, Pre-RO Carbon Filter and Post-RO Carbon
Filter along with the other household waste through the municipal disposal system.
02. You should only store water in the purifier and not use other bottles and containers. In case you do store,
please ensure that the bottle/container is properly cleaned.
03. Do not use water not intended for drinking in Pureit system e.g. from abandoned or abused water bodies
or water sources in which human, animal or industrial wastes are disposed or water that is excessively
acidic or alkaline.
04. The output water may continue to have flora which are harmless and pose no health hazard to normal
healthy adults and children.
05. You should ensure that the area around and beneath the purifier is kept clean at all times.
06. Freshly purified water should be used for drinking.
07. Never buy Pureit Advanced RO + MF / RO + UV
all you have to do is call Pureit Helpline number and we will deliver a new GKK to you at your home for a
minimal delivery charge.
08. Don't drop any of the components, or the purifier as a whole from a height. This may cause the components
to fracture or break, and the guarantee of getting water 'As safe as boiled water' will no longer be valid.
09. Do not use hot or boiling water in the purifier. Similarly do not use freezing cold water (less than 10 °C)
in the purifier.
10. The point-of-use Reverse Osmosis drinking water treatment systems addressed by NSF-58 standard are
designed to be used for the reduction of specific substances that may be present in drinking water supplies
(public or private) which are considered to be microbiologically safe and are of known quality.
IMPORTANT:
Please call the Pureit Helpline number (1860-210-1000) for buying Pureit genuine GKKs/Spares.
This will ensure you continue getting 'As safe as boiled water' from your Pureit Advanced RO + MF / RO + UV*.
* or the GKK from an unauthorised source. Remember
FAqs
How does Pureit Advanced RO + MF / RO + Uv
purify water?
Pureit Advanced RO + MF / RO + UV has a 6-stage
*
purification system which ensures you get water that is
'As safe as boiled water' and also removes excess total
dissolved solids (TDS) to make your water tastier.
In the first stage, the water passes through the
Pre-Sediment Filter which removes fine and coarse
particulate impurities/dirt.
The second stage is the Pre-RO Carbon Filter that
removes chlorine and organic impurities like harmful
pesticides. It also adsorbs bad taste and odour-causing
organic compounds from water.
The third stage is the Post-Carbon Sediment Filter
which removes the remaining dirt.
Then the water passes through the RO Membrane at
high pressure, with the help of an inbuilt pump.
The RO removes dissolved salts, hardness, pesticides and
heavy metals like arsenic, lead and mercury.
It also removes microbial contaminants like bacteria,
virus, protozoa and parasites.
The fifth stage is the Micro Filtration (MF) /
UV Chamber which acts as an additional assurance of
safety towards microbial contaminants.
The last stage is the Post-RO Carbon Filter,
which removes bad odour and enhances the taste
of purified water.
What is the storage capacity of
'Pureit Advanced RO + MF / RO + Uv * '?
Pureit Advanced RO + MF / RO + UV * has a storage
tank capacity of 5 litres. The process of filling the
storage tank is fully automatic and when you take
water out of the tank, the purification process
automatically starts and refills the storage tank
provided power is on.
How much time it takes to purify water
in 'Pureit Advanced RO + MF / RO + Uv * '?
Pureit Advanced RO + MF / RO + UV can purify up to
*
9–12 litres of water per hour. However, the time taken
to purify depends on the life of the filters, the input
water pressure, TDS and other impurities present
in water.
How will I get new consumables/membranes
*
replaced?
You need to call the Pureit Helpline (1860-210-1000)
number and order for a Germkill Kit . The Customer
™
care specialist will visit your place and replace the
Germkill Kit ™ at a nominal cost.
Can I use any type of water to purify through my
Pureit Advanced RO + MF / RO + Uv * ?
Pureit Advanced RO + MF / RO + UV will purify
*
"potable" water for removal of hardness and other
impurities to give you safe drinking water. If the input
water has impurities normally not present in drinking
water (high iron/turbidity/microbial contamination etc.)
or water is from unknown source (river/lake/pond/
borewell etc.) then suitable pre-treatments may be
required.
What are all the consumables which are
to be replaced?
You need to replace Sediment Filter approximately
every 6 months from the date of installation,
GKK-1 approximately every 1 year from date of
installation and GKK-2 approximately every 2 years
from date of installation.
Can I drink the first purification cycle of water
from the purifier?
No, it is recommended to throw the first cycle of
water that is filled in the storage tank when the new
Pureit Advanced RO + MF / RO + UV * purifier is
installed and also whenever the Germkill Kit ™ s are
replaced.
Can I open and service my purifier?
It is not recommended to open and service the device
by an individual. Call our customer care if you face any
issue which requires servicing and opening the device.
23