Selecting Your Connection Quality; Hdmi Digital Connection; Connecting Your Devices - Sanyo FW40D48F Owner's Manual

No included cables are used with these connections:
Please purchase the necessary cables at your local store.
●
Before you connect the AC power cord:
Be sure other devices are connected properly before plugging in the
AC power cord.

Selecting your connection quality

HDMI - Highest quality
Supports high-definition digital signals and gives highest picture and
sound quality. Video and audio signals are combined in one cable.
You must use HDMI for full high-definition video and to enable fun-
Link (HDMI CEC).
Note(s)
SANYO HDMI supports HDCP (High-bandwidth Digital Contents Protection).
●
HDCP is a form of digital rights management that protects high-definition
content in Blu-ray Disc™ or DVDs.
Component (Y Pb Pr) - High quality
Supports high-definition analog signals but gives lower picture quality
than HDMI. Component (Y/Pb/Pr) video cables combine red / green /
blue video cables with red / white audio (L/R) cables. Match the cable
colors when you connect to the TV.
Composite - Basic quality
For analog connections. Composite video / Audio analog cable usually
combine a yellow video cable with red / white audio (L/R) cables. With
this unit, yellow cable must be connected to Y (green) jack on the
component video input jacks.

Connecting your devices

HDMI digital connection

HDMI connection offers the highest picture quality.
HDMI (High-Definition Multimedia Interface) transports high-
definition digital video and multi-channel digital audio through a single
cable.
IN
HDMI cable
HDMI-DVI connection
This unit can be connected to a device that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it requires
audio cable for analog audio signal as well.
IN
conversion cable
IN
Note(s)
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed
●
HDMI cable is recommended for the better compatibility.
For HDMI connection
The unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of video signals,
●
32kHz / 44.1kHz and 48kHz of audio signals.
This unit accepts a 5.1 channel audio signal (Dolby Digital) and 2 channel audio
●
signal (LPCM).
If audio source is 7.1 channel audio signal (Dolby Digital) and user selects
●
Multichannel at Digital output format, then the digital audio output will be 5.1
channel audio signal (Dolby Digital).
This unit accepts only signals in compliance with EIA861.
●
For HDMI-DVI connection
The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
●
HDMI-DVI connection requires separate audio connections as well and the
●
audio signals are output as analog (L/R) audio.
DVI does not display 480i image which is not in compliance with EIA/
●
CEA-861/861B.
12
Set-top box
or
Blu-ray Disc™ /
DVD player
or
OUT
HD game console
Audio (L/R)
OUT
cables
Cable receiver
or set-top box
with the DVI
HDMI-DVI
output jack
OUT
Continued on next page.
.
English