Quick Start Guide; Pairing - Miccus BBRTX-01 Quick Start Manual

Quick Start Guide:

• Attachtheantenna:On the back of the RTX, remove the red
rubber connector cover and attach the antenna. Turn clockwise
until slightly snug. Position the antenna upright.
• Connecttheaudio:Before powering up, choose the included
connector cable that is appropriate for your connection. When
using as a transmitter (TX mode) connect your audio cable to
the "TX Audio In" (RCA) or to the "Line In" (3.5mm). When
using as a receiver (RX mode) connect your audio cable to the
"RX Audio Out" or to the "Line Out". Some devices may require
an additional audio adapter or cable which is not included.
• Poweron/off:Connect to USB power and hold the power button
(the front center button) for 3 seconds until the indicator light
turns on and begins blinking. To power off, hold the power button
for 3 seconds until the indicator light turns off.

Pairing:

1. Useasatransmitter(TXMode)
• Place your Bluetooth® receiving device into pairing mode.
• Power on the Home RTX, press the RX button once for 3
seconds, release, and then double press the TX button.
• Allow up to 30 seconds, when pairing is successful the RTX
indicator light turns solid red.
2. Useasareceiver(RXMode)
• Power on the Home RTX, press the RX button for 3 seconds and
release.
• Open the Bluetooth® menu on your phone or tablet and select
the Home RTX.
• If required, use passkey "0000". When pairing is successful the
RTX indicator light turns solid blue.
1