Safety Instructions For Installation; Grounding Instructions - LG RV1329A4S Original Owner's Manual

6
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
w
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, injury to persons, or death.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction
or breakdown, grounding will reduce the risk of electric shock
by providing a path of least resistance for electric current.
This appliance must be equipped with a cord having an
equipmentgrounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and
ordinances.
Do not use an adapter or extension cord. Do not remove ground
prong. If you don't have the proper outlet, consult an electrician.
Do not modify the plug provided with the appliance.
WARNING
w
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician
or service person if you are in doubt as to whether the appliance is properly grounded.

SAFETY INSTRUCTIONS FOR INSTALLATION

WARNING
w
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following:
• Properly ground dryer to conform with all governing codes
and ordinances. Follow details in the installation instructions.
Electric shock can result if the dryer is not properly grounded.
• Before use, the dryer must be properly installed as described
in this manual.
Electric shock can result if the dryer is not properly grounded.
• Install and store the dryer where it will not be exposed to
temperatures below freezing or exposed to the weather.
• All repairs and servicing must be performed by an authorized
servicer unless specifically recommended in this Owner's
Manual. Use only authorized factory parts. Failure to follow this
warning can cause serious injury, fire, electric shock, or death.
• To reduce the risk of electric shock, do not install the dryer in
humid spaces. Failure to follow this warning can cause serious
injury, fire, electric shock, or death.
• Connect to a properly rated, protected, and sized power
circuit to avoid electrical overload. Improper power circuit can
melt, creating electric shock and/or fire hazard.
If it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
This appliance must be connected to a grounded metal,
permanent wiring system or an equipmentgrounding conductor
must be run with the circuit conductors and connected to the
equipmentgrounding terminal or lead on the appliance.
Electric shock can result if the dryer is not properly grounded.
The appliance may only be installed in a room if the room meets
the appropriate ventilation requirements specified in the national
installation regulations.
Minimum required spacing of 2,54cm to adjacent appliances, walls
and furniture.
• Remove all packing items and dispose of all shipping
materials properly. Failure to do so can result in death, explosion,
fire, or burns.
• Place dryer at least 18 in. above the floor for a garage
installation. Failure to do so can result in death, explosion, fire, or
burns.
• Keep all packaging from children. Packaging material can be
dangerous for children. There is a risk of suffocation.
• Keep the area underneath and around your appliances free of
combustible materials such as lint, paper, rags, chemicals, etc.
Failure to do so can result in fire.
• Do not place candles, smoking materials, or other flammables
on to top of the product.
Dripping wax, smoke, or fire can result.
• Remove all protective vinyl film from the product. Failure to do
so can cause product damage, smoke or fire.
• Means for disconnection with contact separation at least 3mm
is that the means for disconnection must be incorporated in
the fixed wiring according to the wiring rules.