Table of Contents
Advertisement
RESETTING THE POWER PACK
The Power pack has Overload Protection . If the Power Pack detects an overload situation
either during jump starting or digital charging it will shut down .
To rest the power Pack simply recharge the Power Pack for 10 to 15 secs with either the
240v Wall Charger (A) or Car Charger (B) .
STORAGE AND MAINTENANCE
Always store your Power Pack in the Carry Case supplied in a moisture free environment .
Avoid storing the SJS3000 kit in areas of excessive heat where ambient temp is above 60
deg C
Only clean the Power Pack and accessories with a dry cloth .
Regular recharging of the Power Pack is recommended every 6 to 8 weeks which will en-
hance the battery cell capacity life greatly .
RECOMMENDED GENUINE SJS ACCESSORIES .(Not Included )
Part No. SSCFCL156
For powering 12v DC devices up to
180 watts 15 amps .
Part no. TP001
12v Tyre Pump 0-80 psi .
Variable current draw 2 to 6 Amps.
8
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the + Smart Jump Start Charger SJS3000 PRO Series and is the answer not in the manual?