Do you have a question about the + Smart Jump Start Charger SJS3000 PRO Series and is the answer not in the manual?
Questions and answers
Kenneth Smith
May 7, 2025
Usar Manual for SSCO6
Summary of Contents for SJS + Smart Jump Start Charger SJS3000 PRO Series
Page 1
USER MANUAL PRO Series SJS3000 For use with MOST Vehicles : UP TO 7L (7000cc) DIESEL Engines ** UP TO 10L (10,000cc) PETROL Engines ** 3000 Amp Max. Cell Power * 1200 Amp Max. Peak Clamp Power * 800 Amp Max.
Page 2
*IMPORTANT* All SMART JUMP START CHARGERS are designed to be used as an EMERGENCY JUMP STARTER and a PORTABLE POWER SUPPLY to enable charging of most digital devices. They are capable of jump start- ing MOST VEHICLES WITH FLAT BATTERIES . They are NOT a vehicle battery charger. THIS PRODUCT WILL NOT RECTIFY EXISTING OR APPARENT STARTING SYSTEM PROBLEMS .
Page 3
FUNCTION DETAILS SJS3000 POWER PACK LED FLASHLIGHT LCD DISPLAY SCREEN MULTI VOLT DIGITAL CHARGE PORT 12V, 16V , 19V DC MODE SWITCH (a) USB DIGITAL CHARGE PORT 5V 2.1A DC (b) USB DIGITAL CHARGE PORT 5V 2.1A DC CHARGING INPUT PORT ON / OFF SWITCH JUMP PORT...
Page 4
SJS3000 ACCESSORIES INCLUDED 240V AC / 15V DC 2A BATTERY CHARGER Part No. SJS02BC 12VDC / 15VDC 1A CAR CHARGER Part no. SSC01CL JUMPER LEADS Part No. JSSJL30 EC8 to EC5 CABLE ADAPTOR Part No. SJSEC85 USB 5V 2 IN 1 ADAPTOR CABLE Part No.
CHARGING THE POWER PACK Before initial use please fully charge the Power Pack with either the 240v Wall Charger (A) or the Car Charger (B) . WARNING : ONLY USE THE BATTERY CHARGERS SUPPLIED WITH YOUR SJS3000 KIT . THE USE OF ANY OTHER BATTERY CHARGERS COULD DAMAGE THE POWER PACK RE- SULTING IN CATASTROPHIC DAMAGE BY FIRE OR OTHER AND OR RESULT IN SERIOUS INJURY .
LCD Display Screen will show remaining capacity . To power 12v device from the Jump Port the ON/OFF does not necessarily have to be ON . DO NOT USE ANY OTHER FORM OF PLUG OR CABLES CONNECTED TO THE JUMP PORT OTHER THAN GENUINE SJS ACCESSORIES .
Page 7
JUMP STARTING A VEHICLE WARNING : DO NOT USE ANY OTHER JUMPER LEADS OTHER THE THOSE SUPPLIED WITH THE SJS3000 KIT . THE JUMPER LEADS (Part No, JSSJL30) HAVE MANY PRO- TECTION FEATURES AND ARE SPECFICALLY DESIGNED FOR THE SJS3000 POWER JUMP START SAFE Technology PACK AND USE THE LATEST TO PROTECT THE POW-...
Page 8
JUMPER LEADS JSSJL30 Part No. LED IDENTIFCATION CODES AND TROUBLE SHOOTING GUIDE PROBLEM POSSIBLE CAUSE / CHECK SOLUTION GREEN SLOW FLASH Fully charge Power Pack Low Power Pack Voltage . Too When jumper leads are low for jump starting. (10.5V) (12.5V) plugged into power pack.
Regular recharging of the Power Pack is recommended every 6 to 8 weeks which will en- hance the battery cell capacity life greatly . RECOMMENDED GENUINE SJS ACCESSORIES .(Not Included ) Part No. SSCFCL156 For powering 12v DC devices up to 180 watts 15 amps .
Page 10
• The use of any other cable or item that could be connected to the jump port of this product to power 12v devices other than Genuine SJS Accessories . • If the Power Pack case has attempted to be opened or has been opened and or attempted repair .
Need help?
Do you have a question about the + Smart Jump Start Charger SJS3000 PRO Series and is the answer not in the manual?
Questions and answers
Usar Manual for SSCO6