Universal Electronics Watch Remote Control Manual page 6

Watch Remote Manual.0814.qxd 8/14/01 4:49 PM Page 6
input for your box is 1314. To enter this number you would first press Vol + to
enter the number 1, then press Ch + to enter the number 3, then Vol + to
enter the number 1 again and, finally, Ch - to enter the number 4.
Now, using the above example, follow the remaining steps:
1. With pen and paper in hand, refer to the Codes section beginning on page 7
and look for your brand of cable box and TV. Write down all possible codes for
both your cable box and TV. This will make the following steps easier.
2. With all codes in front of you, turn on your cable box and complete the
following:
a. Press and release the Cable key.
b. Press the Setup key until the red LED light blinks twice, then release
key.
4
Penney 1123, 1213,
1124, 1134,
1122, 1222,
1114, 1133
Philco 1132, 1234,
1122, 1144,
1114
Philips 1132
Pilot 1122, 1114
Pioneer 1214, 1244
Portland 1114, 1142
Princeton 1312
Prism 1124
Proscan 1123
Proton 1222
Pulsar 1113, 1114
Quasar 1124, 1232
RCA 1123, 1124,
1143, 1114,
1244
Radio Shack 1123, 1212,
1224, 1122,
1222, 1114,
1133
Realistic 1212, 1224,
1122, 1222,
1114, 1133
Runco 1113, 1122
SSS 1224, 1114
Sampo 1122
13