Alpine PDP-E800DSP Owner's Manual page 23

Application Setting Tab
1
2
1 DSP Status
This section shows the serial number of the
amplifier and the firmware version.
It is possible to delay switching on
and off the amplifier between 1s
and 10s.
The Autoremote feature allows to
switch on the amplifier by detection
of an audio signal. This may help in
cars where no amplifier turn on
signal is available.
2 Alpine Sound Lab for PDP-E800DSP Status
Here you can find information regarding
software and build versions.
Depending on the environment the
Alpine Sound Lab for PDP-E800DSP
is used in, you can choose between
a day and a night theme.
Here you can select your preferred
language for the Alpine Sound Lab
for PDP-E800DSP.
3 Wireless Status and Settings
This section allows to check the configuration of
the wireless adapter WAD-DPD1.
Basic settings can also be made. Usually the
default configuration will work fine.
3
23
-EN