Step 5 : Setting The Clock - Sony SLV-ED225 Service Manual

Step 4 : Setting up the VCR with the Auto Set Up function (continued)
3
Press OK.
PLAY The SYSTEM SELECT menu appears.
OK
For SLV-ED929MI
For SLV-ED925PS, ED828ME/SG,
ED825PS, ED323ME/SG and
ED225PS
4
Press M/m/</, to select the
appropriate TV system, then press
PLAY
OK.
OK
The VCR starts searching for all of
the receivable channels and presets
them (in the appropriate order for
your local area).
If you want to change the order of
the channels or disable unwanted
programme positions, see
Changing/disabling programme
positions on page 25.
After the search is complete, the clock setting menu appears. See
Setting the clock on page 18.
16 Getting Started

Step 5 : Setting the clock

You must set the time and date on the VCR to use the timer features properly.
Before you start
¥ Turn on the VCR and the TV.
¥ Set the TV to the video channel.
¥ Refer to Index to parts and controls for button locations.
1
MENU Press MENU, then press M/m/</
, to highlight CLOCK SET and
press OK.
PLAY
OK
2
Press M/m to set the hour.
PLAY
OK
3
Press , to select the minutes and
set the minutes by pressing M/m.
PLAY
OK
18 Getting Started
S YS TE M S EL E CT
SY S TE M— B/ G S YS TE M —D /K
SY S TE M— I S YS T EM —B / B
U .S —A N T. U. S— H RC
U .S —I R C JA PA N
SE LE C T :
EX E CU TE : O K EN D : ME N U
S YS TE M S EL E CT
S Y ST EM — B / G
S Y ST EM — D / K
S Y ST EM — I
S E LE CT :
S E T : O K EX I T : M E NU
AU TO SE T U P
PL EA SE W A IT
4 0 %
EX I T : ME N U
1 2 : 0 0 1 / JAN / 2 0 0 2
T UE
S E LE CT : SE T :
E N D : O K EX I T : ME NU
1 8 : 0 0 1 / JAN / 2 0 0 2
T UE
S E LE CT : SE T :
E N D : O K EX I T : ME NU
1 8 : 3 0 1 / JAN / 2 0 0 2
T UE
S E LE CT : SE T :
E N D : O K EX I T : ME NU
1-4
To cancel the Auto Set Up function
Press MENU.
To change the RF channel
If the picture does not appear clearly on the TV, change the RF channel on
the VCR and TV. Select INSTALLATION from the menu, then press M/m
to highlight VCR OUTPUT CH and press ,. Select the RF channel by
pressing the M/m buttons. Then, tune the TV to the new RF channel so that
a clear picture appears.
Tip
¥ If you want to change the language for the on-screen display from the one preset
in the Auto Set Up function, see page 21.*
Notes
¥ Whenever you operate the Auto Set Up function, some of the settings (timer, etc.)
will be reset. If this happens, you have to set them again.
¥ Auto preset starts automatically only when you plug in the mains lead for the first
time after you purchase the VCR.
¥ After using the Auto Set Up function, the LANGUAGE SET menu* does not
appear automatically when you connect the mains lead again. If you want to use
the Auto Set Up function again, press MENU, then press M/m/</, to highlight
INSTALLATION and press OK. Press M/m to highlight AUTO SET UP, then
repeat all procedures from step 3.
¥ Auto preset can be performed by pressing x STOP on the VCR continuously for
5 seconds or more with no tape inserted.
* SLV-ED828ME/SG and ED323ME/SG only
4
Set the day, month, and year in
sequence by pressing , to select
PLAY
the item to be set, and press M/m to
OK
select the digits, then press ,.
The day of the week is set
automatically.
5
MENU
Press MENU to exit the menu.
Tip
¥ To change the digits while setting, press < to return to the item to be changed,
and select the digits by pressing M/m.
Getting Started 17
1 8 : 3 0 2 8 / S EP / 2 0 0 2
SA T
SEL ECT : S ET :
END : OK E XI T : ME NU
Getting Started 19