Download Print this page

RBH Sound EP-ZERO Owner's Manual page 7

Advertisement

INSERTING THE EAR TIPS
Foam Tips
1. Place your thumb on the outside of
the foam ear tip and push the foam tip
opening towards the earphone to ensure
the tip stays open.
2. Roll down or compress the foam cushion
into a thin, round cylinder. (see Figure 1)
3. Pull back on ear slightly to open ear canal.
Gently insert the tip into the ear as far
down as is comfortable. (see Figure 2)
4. Hold ear cushion in place for approximate-
ly 5-10 seconds while the foam expands to
create a tight seal. (see Figure 3)
Silicone Tip
Carefully insert the ear tip while pulling back
on the ear slightly to open ear canal. Gently
insert the tip into the ear as far down as is
comfortable. Outside noise should almost
immediately be blocked out.
REMOVING/CHANGING THE EAR
6
Figure 1
Figure 2
Figure 3

Advertisement

loading

Related Products for RBH Sound EP-ZERO