Download Print this page

RBH Sound EP-ZERO Owner's Manual page 9

Advertisement

TIPS
Grasp the body of the earphone and gently twist and pull the tip to remove
it. DO NOT hold or pull on cable while removing the tip.
Twist and pull off the ear tip to remove it from the nozzle. Slide on a new
ear tip so that it completely covers the barb and the nozzle. (see Figure 4)
Select an ear tip that provides the
best fit and sound isolation. It should
be easy to insert into the ear, fit
comfortably, and easy to remove from
the ear (see Figure 4). For foam tips,
recommended replacement is after
three months of regular use.
CLEANING THE EARPHONES
Over time, an ear cushion may lose its elasticity. If this happens and
you notice a drop in performance, congratulations ... you have good
ears! You also might want to replace the cushions to get back to the
earphones' original performance level. A few other suggestions are:
1. Remove the ear cushion from the earphone (instructions above). If
using the foam tips, please discard and replace with new. If using a
silicone cushion, wash with mild soap and dry thoroughly.
8
Figure 4

Advertisement

loading

Related Products for RBH Sound EP-ZERO