Locations and Function of Parts and Control
3.2.3 Indicator Status
There are a VIDEO indicator and a LINK indicator at the bottom of WVT-501.
The different combinations of these two indicators and the different status of
the unit are as the table below:
Operation
Switch Channel
Parity
Communication normally,
but no video
Both communication and
video displays normally
3.2.4 Start Up
Press the power button at the side of the unit, the position of the power button
is as shown in Figure 3.2-2:
Figure 3.2-2 The Position of Power On Switch
Push the button to the "ON" side to switch on the power, and the OLED
screen is lit up.
Push the button to the "OFF" side to switch off the power, and the OLED
screen is lit off.
Indicator Status Description
VIDEO and LINK flash quickly and alternately
(Green)
VIDEO and LINK flash quickly at the same
time(Green)
LINK constant light(Green), VIDEO flash(Green)
VIDEO constant light (Green), LINK constant light
(Green)
9