If you sell the unit please make sure that the buyer also receives this manual. Our products are subject to a process of continuous development. Thus, they are subject to change. DS-2 RF DMX dimmer...
Our online guides provide detailed information on technical basics Online guides and terms. Personal consultation For personal consultation please contact our technical hotline. If you have any problems with the device the customer service will Service gladly assist you. DS-2 RF DMX dimmer...
Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ . 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. DS-2 RF DMX dimmer...
Page 7
This combination of symbol and signal word indicates a pos- sible dangerous situation that can result in material and environmental damage if it is not avoided. Warning signs Type of danger Warning – high-voltage. Warning – danger zone. DS-2 RF DMX dimmer...
This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety. DS-2 RF DMX dimmer...
Page 9
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. DS-2 RF DMX dimmer...
Page 10
Keep the device away from naked flames. NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. DS-2 RF DMX dimmer...
Page 11
Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire. DS-2 RF DMX dimmer...
Connect the output of the first DMX device to the input of the second one and so on, to form a series connection. Make sure that the output of the last DMX device in the chain is terminated by a resistor (110 Ω, ¼ W). DS-2 RF DMX dimmer...
Connections and controls Connections and controls Top view DS-2 RF DMX dimmer...
Page 15
This fader adjusts the brightness of the connected spotlight. It works according to the HTP principle (Highest Takes Precedence), the highest issued value has priority here. 7 External fader with the same function as the fader on the unit. DS-2 RF DMX dimmer...
Page 16
Connections and controls Rear panel 8 Power cord. 9 [External Fader] Mini phone connector for the external fader. 10 [DMX OUT] DMX output. DS-2 RF DMX dimmer...
The display shows the last set DMX address, e.g. ‘A123’ . Use the arrow buttons to select a value between 1 and 512 (display shows ‘A001’ … ‘A512’ ). The setting is instantly applied. While setting the DMX address the output is switched off. DS-2 RF DMX dimmer...
Page 19
40 % or more the spotlight is turned on. Use the arrow buttons to choose between Switch On (display shows ‘S-on’ ) and Switch Off (display shows ‘S-oF’ ). Press [MENU] to apply the settings and return to adjusting the DMX address. DS-2 RF DMX dimmer...
Page 20
Press [MENU] to switch to Dimmer-Preset mode. Use the arrow buttons to set a value between 0 and 100 (display shows ‘L010’ … ‘L100’ ). The value is applied automatically. Press [MENU] to apply the settings and return to adjusting the DMX address. DS-2 RF DMX dimmer...
Operating supply voltage AC 230 V , 50 Hz Fuse 5 mm × 20 mm, 10 A, 250 V, fast blow Dimensions (W × H × D) 92 mm × 65 mm × 182 mm Weight 1.1 kg DS-2 RF DMX dimmer...
The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please refer to the drawing and table below for the pin assignment of a suitable XLR plug. Configuration Ground, shielding Signal inverted (DMX–, ‘cold signal’) Signal (DMX+, ‘hot signal’) DS-2 RF DMX dimmer...
Clean with a dry soft cloth. Stubborn dirt can be removed with a slightly dampened cloth. Never use solvents or alcohol for cleaning. DS-2 RF DMX dimmer...
Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. DS-2 RF DMX dimmer...
Need help?
Do you have a question about the DS-2 RF DMX and is the answer not in the manual?
Questions and answers