Table of Contents
Advertisement
6
Note: When not connected to Power outlet/USB charger, user may have to press
and hold the Battery level indication button for 5 sec to
charge the S3 device battery from S3 smart cover battery.
Complete the following steps to charge the battery of the accessory.
1. Plug the charger into a power outlet.
2. The charger port is located at the right
side of accessory. Insert the Micro USB
connector into the port and insert the
other end of the USB cable into the
charger.
Alternatively,
accessory with your PC. Insert the Micro
USB connector USB cable into the charger
port of the accessory and insert the other
end of the cable into a USB port on your
Laptop/Desktop.
3. If the battery is being charged when the
phone is switched off, only the battery
LED is displayed on the S3 smart cover
accessory.
If the battery is being charged while the phone is switched on, you will
notice that the bars in the battery charge icon (visible on the home screen
of your phone) show movement indicating that the battery is being
charged. The smart cover LED also turns green indicating the battery of
the S3 smart cover also being charged. After the phone is fully charged,
the battery bars on the display stop scrolling. At this point, you can
disconnect the phone from the charger.
The following table displays the Device Specification of S3 Smart Cover:
Device Specifications
Enhanced Push to Talk Button Yes
Connectivity Ports Dock Pin / Micro USB
Hardware & Software Version V2.0
Operating Temperature -20℃ ~ +55℃
Copyright 2013, Kodiak Networks, Inc.
you
can
charge
the
2402 ~ 2480 MHz
1500 mAh
Frequency
Battery
V3.0
Bluetooth
Advertisement
Table of Contents
