Inserting S3 Smart Cover; Bluetooth Connectivity; Bluetooth Pairing Of Carbonado S3 Smart Cover With Samsung S3 Device; When To Perform Bluetooth Connection - Kodiak Carbonado S3 User Manual

Smart cover for samsung s3
Table of Contents

Advertisement

12
While inserting S3 smart cover over your Samsung S3 device, care should be taken to align the

Inserting S3 smart cover

micro USB port of the cover with that of the S3 device, this is required because the charging USB
port of the cover will also be used to charge your S3 device simultaneously.
Note: Plugging the accessory into Power outlet/USB charger, will charge the S3
device & S3 smart cover's battery simultaneously.
Note: When not connected to Power outlet/USB charger, user has to press and
hold the Battery level indication button for 5 sec to charge from S3 cover battery
to S3 device battery.
The S3 smart cover is wirelessly connected to your Samsung S3 device through Bluetooth, thus the

Bluetooth Connectivity

S3 smart cover also has a rechargeable battery which is molded into the plastic case of the cover
case.
Follow the instructions to pair your S3 smart cover Bluetooth with your Samsung S3 device:

Bluetooth pairing of Carbonado S3 smart cover with Samsung S3 device

1. Power OFF the S3 smart cover (Blue LED blinking indicates the power of smart cover being
switched OFF).
2. Press & Hold the S3 smart cover power Switch for 5 sec. S3 smart cover will enter in to
pairing state. This is indicated by S3 smart cover indication LED.
3. Now, enable Bluetooth on your Samsung S3 mobile device & scan for available Bluetooth
devices.
4. You can find the new S3 smart cover with name "RTKS3C0".
5. Select the device and get paired.
You will have to reconnect to S3 smart cover during the following scenarios:

When to perform Bluetooth connection

1. Whenever you restart your Samsung S3 device.
2. Whenever you disable & then enable again the Bluetooth on your S3 device.
3. Whenever you disconnect only the S3 smart cover using the Bluetooth shortcut on your
mobile.
4. Whenever you confirm disconnection of the connected S3 smart cover from the Bluetooth
settings screen.
In all the above mentioned cases, user has to manually connect the S3 device with the S3 smart
cover.
Copyright 2013, Kodiak Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

S3c0

Table of Contents