Table of Contents
Advertisement
Getting Started
The following topics will give you all the information needed to set up your S3 smart cover for the
first time.
Refer to the following sections to insert and charge the S3 smart Cover.
Setting up your S3 Smart Cover
Complete the following steps to insert your S3 Smart Accessory onto your Samsung S3 phone.
Inserting the S3 Smart Cover
1. The S3 smart cover accessory is as shown in
the picture beside. Insert the S3 smart cover
on to your phone.
2. While inserting your phone inside the cover
make sure the Micro USB port of the smart
cover is aligned along with the USB charging
port of your phone.
Your S3 smart cover accessory comes with an inbuilt battery which
Charging the S3 smart cover Battery
connects to your Samsung S3 phone through a Micro USB
port/Charging port on your S3 phone. The battery provided along
with your S3 smart accessory does not come fully charged. We
recommend that you charge the accessory at least for five hours
before you use it for the first time.
Note: With a fully charged battery, the phone cover can remain in standby mode
for longer duration. If the battery is completely out of charge, the charging LED
appears only after some seconds when the charger is connected.
Note: Plugging the accessory into Power outlet/USB charger will charge the S3
device & S3 smart cover's battery simultaneously.
Copyright 2013, Kodiak Networks, Inc.
5
Advertisement
Table of Contents
