Advertisement
4-3. Injector assembly (Nozzle area)
1)Type #1 (33800-27900)
Should be moving freely
Spindle
2) Type #2 (33800-27000)
NOTE :
Cap nut must be tighten by Torque wrench.
Over torque will cause to have lack of injection amount while insufficient
torque will cause to have fuel leaking or abnormal function.
Tightening Torque : 45N-m
Repairing injector must be done in a clean and dust free environment to
prevent injector contamination.
12
Shim
Spring
Guide Pin
Shim
Spindle should be inserted into nozzle holder freely( without any resistance).
Direction
Spindle
Nozzle holder
Required parts for thinner soaking.
Thinner
Cap Nut
Assembling
Diesel
More than 5min
Advertisement
