Advertisement
4-2. Cleaning procedure of injector
Repairing injector must be done in a clean and dust
free environment to prevent injector contamination.
Start
End
Performance test
by Injector Tester
11
Disassembled
Do not interchange internal parts of injectors as it will
influence on its calibration. Use only original parts to
maintain the proper performance.
Cleaning
Note : Do not use brush while rinse to avoid contamination
Soaking
(
more than 5 minutes)
Kerosene or Diesel
Thinner
※ Caution: Thinner and its evaporated gas is harmful to people.
Bottle cap must be closed while soaking.
Assembling
Washing
Rinse
Clean Diesel
Inspection
(To identify the parts that
need to replace)
Advertisement
