Download Print this page

Axiom T2 Owner's Manual

In-wall speakers

Advertisement

Quick Links

All our speaker models; towers, bookshelves, surrounds, centers, subwoofers and
manufacturer's defects for 5 years.
AXIOM CANADA INC. warrants this audio loudspeaker system (the "Product")
to be free from original manufacturing defects in materials and workmanship for
extends only to the original consumer purchaser. AXIOM CANADA INC. does
not warrant goods used in commercial or industrial applications. This warranty
does not cover any expenses incurred in any removal or re-installation of the
product.
If the product should prove so defective within the warranty period, return the
product by prepaid delivery to AXIOM CANADA INC., along with the original
sales invoice or other proof of purchase, which establishes eligibility for warranty
service. AXIOM CANADA INC. will, at its option, replace or repair the product
free of charge and return the product by prepaid delivery. This warranty does not
apply to any product, which has been damaged, misused, altered or repaired by
anyone other than an AXIOM CANADA INC. authorized service facility.
in duration to the period of the express warranties set forth above, and no person
is authorized to assume for Axiom Canada Inc. any other liability in connection
with the sale of the product. Axiom Canada Inc. expressly disclaims liability for
any incidental and consequential damages caused by the product. The remedies
provided under this warranty are exclusive and in lieu of all others.
rights arising from the sale of the product, which vary from province to province
or state to state. Some provinces / states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion may
not apply in some areas.
Instructions, étape par étape, pour la mise en fonction de vos enceintes "encastrées - en surface"
Location: /
Positionnement:
half the listening distance. Please make sure the speaker wire has a clear path
from your stereo or A/V receiver to the placement of your speaker.
wall with drywall or some similar type wall board covering. For other types of
walls special installation procedures will need to be used.
+++
Ceci est de loin l' é tape la plus importante avant même le début de l'installation.
Pour un positionnement optimal, les haut-parleurs devraient être localisés, l'un
à droite et l' a utre à gauche, à mi-hauteur de l' é cran de télé avec lequel ils seront
associés. Alternativement, la hauteur idéale serait d' e nviron cinq à six pieds
Product Links:
au-dessus du plancher et entre les colombages. Si c' e st possible, évitez les coins.
http://axiomaudio.com/t2.html
Séparez les haut-parleurs gauche et droit d'une distance d' e nviron cinq à dix
pieds ou de la moitié de la distance d' é coute. Veuillez vous assurer qu'il n'y ait pas
stéréophonique ou Audio/Vidéo.
Les haut-parleurs Architecture d' A xiom sont conçus pour être installés sur un
mur avec colombage et gypse communs ou sur une surface de même type. Pour
d' a utres types, il faudra recourir à une procédure spéciale.
Model:
T2
Max Rec. Amp Power:
150 Watts
Min Amp Power:
15 Watts
Response +/- 3dB:
80 Hz – 22 kHz
Response + 3dB/- 9dB:
70 Hz – 22 kHz
Impedance:
8 Ohms
SPL In Room 1w/1m:
90 dB
SPL Anechoic 1w/1m:
86 dB
X-Over:
2.7 kHz
Tweeter:
Single 1"
Woofer:
Single 5¼"
On-wall Dimensions HWD mm:
296 x 162.6 x 21.6
In-wall Dimensions HWD mm:
280 x 144 x 87.95
On-wall Dimensions HWD inches:
11.65" x 6.4" x 0.85"
In-wall Dimensions HWD inches:
11.02" x 5.67" x 3.46"
Weight kg each:
2.74 kg
Weight lbs each:
6.05 lbs
T2/T22 In-Wall Speakers
Owners Manual
T22
Modèle :
200 Watts
Puissance maximale admissible :
10 Watts
Puissance minimale :
70 - 22kHz
Réponse en freq. +/- 3dB :
60 - 22kHz
Réponse en freq. + 3dB/- 9dB :
8 Ohms
Impédance :
93 dB
Sensibilité en salle 1w/1m :
89 dB
Sensibilité Anéchoïque 1w/1m :
3.5 kHz
Single 1"
Transducteur d'aigu :
Dual 5.25"
Transducteur de grave :
453.5 x 165.5 x 21.6
Dimensions en saillie HLP mm :
433 x 145 x 87.95
Dimensions encastrées HLP mm:
17.85" x 6.52" x 0.85"
Dimensions en saillie HLP inches :
17.05" x 5.71" x 3.46"
Dimensions encastrées HLP :
3.72 kg
Poids en Kilo chacun :
8.2 lbs
Poids en lb chacun :
Filtre :

Advertisement

loading

Summary of Contents for Axiom T2

  • Page 1 For other types of service. AXIOM CANADA INC. will, at its option, replace or repair the product walls special installation procedures will need to be used.
  • Page 2 Using the supplied template and a level (not included) mark clamps are folded into the speaker. an outline of the wall cutout to place the T2/T22 Speakers. Warning: Make sure there aren’t any other wires, pipes, or Insérez le haut-parleur dans la cavité murale en prenant soin de complètement rétracter les 4 pinces de retenue.

This manual is also suitable for:

T22