Modal MD-HPBT01 Quick Setup Manual

B L U E TO O TH STE RE O HE AD SET
Package contents
FIND YOUR USER
GUIDE ONLINE!
• Bluetooth stereo headset
• AC wall adapter
We are going green so a copy
• USB charging cable
of your User Guide is not
provided in the box but is
• Replacement ear pads
available online.
• Quick Setup Guide
Go to
www.bestbuy.com/modal,
then click Support & Service.
Enter your model number in
the box under Manual,
Firmware, Drivers & Product
Information, then click ►.
Before using your new product, please read
these instructions to prevent any damage.
QU ICK SETUP G UI DE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Features
M D- H PB T 0 1
# Item Description
1 Volume Up/Down Press + or – to increase or decrease the volume.
2 Press to turn on your stereo headphones. If you
(power/talk) button receive a phone call, press to talk. Press to turn off
your stereo headphones.
3 Logo with Shows current status of the headphones.
indicator LED
4 Press to begin playback. During playback, press to
(play/pause) button pause playback. Press again to resume playback.
5 Micro USB port Plug the micro USB connector from the AC
adapter into this port to charge your headphones.
6 Rewind • Press once to return to the beginning of a track.
• Press twice to go to the previous track.
• Press and hold to rewind.
Fast-forward • Press once to skip to the next track.
• Press and hold to fast-forward.
7 Microphone Allows you to talk on the telephone.
8 Reflective strip An attractive feature and provides extra safety in
low-light conditions.
LED indicators Using your stereo
headphones
Headset Status LED Status
Power on Blue LED flashes
Turning your stereo
Turning off Red LED dims and
headphones on and off
disappears
• Press and hold the
Low battery Red LED blinks
(power/talk) button for two
continuously
seconds. The LED blinks
Recharging Red LED stays on
blue (when turned on) or
Recharging
Blue LED stays on
complete
red (when turned off), and
Blue and red LEDs
Pairing mode
the voice prompt says
flash rapidly
"Hello", or "Bye."
Connection
Blue LED blinks every
complete
five seconds
Receiving a call
Blue LED flashes Pairing your stereo
rapidly
headphones
Talking on the Blue LED brightens
Notes:
phone and dims repeatedly
• Range is 33 feet (10 meters).
• Supports easy pairing.
• Prompts you by saying
Setting up your
"Connected," when connected.
stereo headphones
• Supports a battery indicator
icon on an iOS device.
Charging your stereo
headphones
Pairing with a cell phone or
• Connect the charging cable
MP3 player
from the AC adapter to
1 With your stereo
your Bluetooth stereo
headphones turned off,
headphones, then plug the
press and hold
AC adapter into a wall
(power/talk) for four seconds.
outlet. The red LED stays
2 On your phone or MP3
on while your stereo
player, select MD-HPBT01
headphones are charging
from the list of discovered
and turns blue when they
devices, then enter the
are fully charged.
password 0000 (four zeros)
(if required) to pair your
headphones.
For more information on
pairing Bluetooth devices
to your cell phone or MP3
player, see the device's
documentation.
Note: After the headphones
have been successfully paired
with the cell phone or MP3
player, the headphones will
automatically reconnect to the
phone or MP3 player.