Amacam AM-C65 Manual

Thank you for purchasing this On Dash
Cam. It is designed for real time video and
audio recording when driving.
Please read this guide carefully before
using your camera, and keep it for future
reference.
IMPORTANT: Please register your camera
to receive firmware updates:
www.amacam.net
For technical support please contact us at
support@amacam.net
Manual editorial and design by 星灵美（深圳）
a Starling May International Company
Shenzhen, China
www.stmax.com.cn
WINDSHIELD MOUNTING
Slide the bracket into the camera's connection, until you hear a click
bracket connection
Position the suction-cup
on the windshield near
the rear-view mirror and
where it will not obstruct
the driving view.
Make sure that the lens is within the wiping range of the windshield
wiper to ensure a clear view even when it rains.
Installation on a tinted window may damage the window.
Loosen the knob to
swivel the camera, and
then re-tighten
AMACAM
AM-C65
CONNECTING TO POWER
Use only the supplied in car charger cable to power the camera and
charge the built-in battery.
Connect the in car charger cable to the USB connector of the camera
and to the cigarette lighter socket of your vehicle.
USB / power
Note:
1. The red LED lights up while the battery is charging.
2. If the environment temperature reaches 45°C or above, the car
adapter can still supply power, but it will not charge the battery. This is
the characteristic of lithium polymer battery and is not a malfunction.
PACKAGE CONTENTS
AM-C65 in car Bracket and
Cam
On Dash charger cable suction cup
USB cable This User In car charger
Guide
SWITCHING ON AND OFF
Auto Power On/Off
Once the vehicle engine is started,
the camera automatically powers
on and starts recording. When the
vehicle engine shuts down, the
camera automatically saves the
Power
recording and turns off the power
button within 10 seconds.
Manual Power On/Off
To manually turn on the power,
press the POWER button. The
camera turns on in STANDBY and
does not start to record.
To turn off, press and hold the
POWER button for at least 2
seconds.
Reset slot
If the camera does not turn on, use a
toothpick to reset.
INTRODUCTION
Lens
Do not touch the lens with
Speaker your fingers. Clean the lens
regularly.
Microphone
Serial number
Indicator
light
Screen
MEMORY CARD
Push the memory card until it clicks into place, with the gold contacts
facing the back of the camera.
To eject, push the card lightly.
Do not remove or insert the card when the device is powered on. This
may damage the card.
Use class 6 or above micro SD card.
Format the card before initial use.
Memory card slot
Class 6 or above
micro SD card