Table of Contents
Advertisement
Model DFG-RS3 Digital Force/Torque Indicator
Data Bits:
Stop Bits:
Parity:
Other settings are configured as follows:
9.1.1 Baud Rate
Select the baud rate as required for the application. It must be set to the same value as the receiving
device.
9.1.2 Data Format
Select the desired data format. The screen appears as follows:
DATA FORMAT
*
Numeric + Units
Numeric Only
Invert Polarity
Omit Polarity
Selection
Numeric + Units
Output format includes the value and unit of measure. Compression/clockwise
values have positive polarity, tension/counter-clockwise values have negative
polarity.
Numeric Only
Output format includes the value only. Polarity same as above.
Invert Polarity
Compression/clockwise values have negative polarity, tension/counter-clockwise
values have positive polarity. May be selected in addition to the Numeric + Units /
Numeric Only selection.
Omit Polarity
Both directions are formatted with positive polarity. May be selected in addition to
the Numeric + Units / Numeric Only selection.
Individual data points may be transmitted by pressing DATA.
8
1
None
Description
User's Guide
12
Advertisement
Table of Contents
