Camera Shutter Release; Relay Mode - Cactus V6 IIs Quick Start Manual

Flash Setup
1. Turn on your flash and switch it to the TTL mode.
2. Switch on the V6 IIs. Decide whether to apply an Auto
Flash Prof i le (default) or a flash-specif i c prof i le.
<FLASH SETUP> <FLASH PROFILE>
• Auto Flash Prof i le <AUTO>: works with all Sony
compatible flashes.
• Flash-specif i c prof i le (e.g. , <SONY F60M> ) : works with
the selected flash model with more accurate power
output.
Remote Power Control
Function Key
Adjusting all groups
Adjusting a single group
+
(e.g. , group A)
Hold
Adjusting the on-camera flash
+

Camera Shutter Release

1. Connect the V6 IIs RX to
your camera using an TX
appropriate shutter
release cable.
2. Match the channel and the
group of the TX and the RX.
Functions Status LED
Half-press Auto-focus Orange
Full press Release the Green
shutter
TTL Pass-through
• The V6 IIs transceiver comes with a pair of hot
shoes that supports TTL pass-through with Sony
cameras and system flashes.
• Turn ON/OFF TTL pass-through mode: Hold
• The LCD display will show
the TTL pass-through indicator
at the lower left hand corner
in TTL pass-through mode.
www.cactus-image.com/v6iis.html
High Speed Sync (1): Normal HSS
1. Turn on the HSS/FP setting of the remote TTL
flashes attached to the V6 IIs RX.
2. Choose Normal HSS from the V6 IIs TX menu.
<FUNCTIONS>
Remote Zoom Control
Function
Toggling to and from the zoom
control panel
Adjusting all groups
, then
Adjusting a single group
(e.g. , group A)
Adjusting the on-camera flash

Relay Mode

Camera Shutter + Flash
RX
TX
TX
Handheld
Menu at a Glance
TX
FUNCTIONS FLASH
SETUP
RX
FUNCTIONS FLASH
SETUP
Visit our website to download the
user manual and check for the latest
f i rmware updates.
<SYNC MODE> <NORMAL HSS>
Key
+
Hold , then
+
RX1
RX2
RX1 RX2
Mount on camera's Connect to flash
hot shoe and connect unit.
using a corresponding
shutter cable.
No set up
<FUNCTIONS> <RELAY>
required.
<ON>
FUNCTIONS
- SYNC MODE
- DELAY
- RELAY
- GROUP SEQUENCE
- SPORTS SHUTTER
POWER RADIO PREFERENCES
SETUP SETUP
- TTL PASSTHROUGH
FLASH SETUP
- FLASH SYSTEM
- FLASH PROFILE
RADIO PREFERENCES
SETUP
High Speed Sync (2): Power Sync
1. Choose Power Sync from the V6 IIs TX menu.
<FUNCTIONS> <SYNC MODE>
2. Adjust the sync time, if necessary .
<FUNCTIONS> <SYNC MODE>
• Turn the dial to the LEFT to expedite the sync
time if you f i nd a dark band at the BOTTOM of the
picture.
• Turn the dial to the RIGHT to delay the sync time
if you f i nd a dark band at the TOP of the picture.
Working with RF60 and V6 II
V6 IIs
RF60
CAMERA
V6 IIs RF 60X / RF60
On-camera Off-camera
Switch to TX mode Switch to Slave
Set all devices to the same channel.
Connect to Sony Standalone with
cameras with MI built-in V6 wireless
shoe. module.
Selection Dial Setup (TX)
Functions Key
Dial Direction
<PREFERENCES>
(Clockwise /
Anti(counter)-
clockwise)
Dial Lock /
Hold on the main screen for 2 sec.
Unlock
Temporary
Press once and turn the dial within
Unlock*
2 sec.
* The Temporary Unlock of the selection dial can be
disabled in the <PREFERENCES> menu.
TX RX POWER SETUP TX RX PREFERENCES
√ - POWER MODE √ - AF-ASSIST (TX/RX)
√ √
- EV STEP √ - BACKLIGHT POWER
√ √
- LO POWER √ - BACKLIGHT TIME
√
- DAYLIGHT MODE
RADIO SETUP TX RX
√
- SWAP CONTROL
√
- CHANNEL
√ √
- DIAL DIRECTION
- RADIO ID
TX RX √ √
- TEMPORARY UNLOCK
- MULTI-MASTER
√
√ √ - SLEEP
- WORK RANGE
√
√ √
- FACTORY RESET
Corporate Office:
HARVEST ONE LIMITED
11D, BLK 2, KOON WAH MIRROR FACTORY (6TH) IND. BLDG. ,
7-9 HO TIN ST, TUEN MUN, HONG KONG
PLEASE CONTACT YOUR LOCAL DEALER FOR CUSTOMER SERVICE.
© HARVEST ONE LTD. 2016 (1 EDITION)
st
<POWER SYNC>
+
V6 II
V6 II
Off-camera
Switch to RX mode
Connect to Canon,
Nikon, Olympus,
Fujif i lm or Pentax
TTL flashes.
<DIAL DIRECTION>
TX RX
√ √
√ √
√ √
√ √
√
√ √
√
√ √
√ √