Note: The following components are always required to construct a working unit and must
be ordered separately (amounts given here are for one IGBT supply module):
•
LCL filter module(s). For more information, see
232, and
LCL filters (+C183+C188 and +G304 or +G427)
•
Common mode filter (consists of two toroidal cores, 2 × 3AUA0000032859). For more
information, see
•
BCU control unit kit. For the contents of the kit, see
•
Fiber optic cables (page 237)
•
1 × Control circuit plug connector (3AUA0000059813)
•
2 × Quick connectors (3AUA0000119227). For the contents of the kit, see section
Busbars and quick connectors
•
Varistor board CVAR-01C (UL/CSA installations only). For more information, see
Varistor kit (UL, CSA)
The other parts listed in this chapter
•
may be required by the application, or
•
make the installation or use of the module easier.
Common mode filters
on page 258.
on page 255.
LCL filters (+C183+C188)
on page 233.
on page 262.
Control unit
Ordering information 231
on page
on page 236.