Table of Contents
Advertisement
2. Enter the user name and password (d
and click Log In to access the web m
3. Click the Account tab. Set Register N
based on the data plan in step
address of the LAN port on the EGW1
4. Click Submit to finish IP phone config
You can choose Voice > Phone Alloc
management system of the EGW1530
phone.
Verify the configuration according to the c
8
document.
Starting Configuration —— Loca
Solution
Planning Server Information
a
When the EGW1530B functions as the loca
the SIP server on the central node at the he
synchronizes them to the EGW1530B. You
the EGW1530B.
Before configuration, collect user quantity in
allocation to the enterprise IT administrator.
The default outgoing prefix of the EGW1530
according to the called number change rule
Server Type
Planned Item
IP address
Port number
Data
synchronization
server
Key for data
synchronization
SIP server
address
SIP server type
SIP server
Heartbeat
detection
interval
Registration
interval
default values: admin) of the administrator
anagement page.
Name to the user number of the IP phone
. Se
et SIP Server to 192.168.1.1 (default IP
c
1530B).
guration.
cation > IP Phone in the web
0B to view the registration status of the IP
chapter Verifying Configuration in this
l Gateway in a Branch in the UC
l gateway in a branch in the UC solution,
eadquarters allocates all user numbers and
do not need to configure user numbers on
n the branch and apply for number
0B is 888. The outgoing prefix is deleted
in outgoing calls.
Remarks
Contact the e
enterprise IT administrator to obtain the IP
address of th
e data synchronization server.
Contact the e
enterprise IT administrator to obtain the port
number of the
e data synchronization server. If the port
number fails t
to be obtained, use the default value 8098.
The EGW153
30B compares its data synchronization key with
that of the da
ata synchronization server. If the keys are the
same, the da
ta synchronization server synchronizes data to
the EGW1530
0B; otherwise, the EGW1530B rejects the data
synchronizati
on. The key is a string of 1 to 22 characters
including digi
ts, letters, or special characters. You can
negotiate with
h the enterprise IT administrator about the key
format.
The address
can be an IP address and or a domain name.
Obtain the ad
ddress from the enterprise IT administrator.
The options a
are IMS or NGN. Obtain the type from the
enterprise IT
administrator.
When the SIP
P server is eSpace U1960, select NGN.
When the SIP
P server is eSpace U2900, select IMS.
Interval for th
e EGW1530B to send heartbeat messages to
the active and
d standby SIP servers, in seconds. The value
ranges from 3
30 to 150. The default value 90 is
recommende
d.
Interval for th
e registration group to send registration
messages for
r users in this group to the SIP server, in
seconds. The
e value ranges from 0 to 14400. The default
value 360 is r
recommended.
8
8
Advertisement
Table of Contents
