Table of Contents
Advertisement
Starting Configuration —— Indep
Planning Users' Internal Numbers
a
Analog phones, fax machines, IP phones, an
EGW1530B. You are advised to connect fax
PHONE port.
When the EGW1530B functions as an indep
outgoing prefix plus the called number to ma
through the FXO ports or BRI ports.
The default outgoing prefix is 888. The outgo
called number change rule in outgoing calls.
An internal number is a string of 1 to 30 digit
An internal number is a string of 1 to 30 digit
Phone Type
Fax machine or analog phone
IP phone
Analog phone 1 (connected to the
EGW1530B through the IAD)
Analog phone 2 (connected to the
EGW1530B through the IAD)
...
Starting Configuration
b
1
On the SIP Server page, disable the UC
O
S
S
Click Next to access the analog phone co
2
not need to be configured when the EGW
3
Based on the data plan in step
leave the registration groups and externa
4
Click Add in the right part of the IP Phon
, configure internal numbers of SIP users
external numbers blank, and click Next.
5
Click Finish to finish EGW1530B configu
Configure the IAD. The following describe
6
1. Open Internet Explorer and enter the
the address box.
2. Enter the user name (default: root) an
2 E t
th
Log In to access the web manageme
3. Choose Basic Configuration > Netw
mode. Set the IAD IP address to 192.
port on the EGW1530B: 192.168.1.1)
and set the IP address of the default g
4. Choose SIP Service Configuration >
SIP server to the IP address of the LA
192.168.1.1).
5. Choose SIP Service Configuration >
user numbers) based on the data plan
pendent IP PBX
nd IADs can be connected to the
x machines to the EGW1530B through the
pendent IP PBX, users can dial the
ake an outgoing call, and the call is routed
oing prefix is deleted according to the
ts
ts.
User Type
POTS user
SIP user
SIP user
SIP user
...
C
mode and click Next.
onfiguration page. Registration groups do
W1530B functions as the IP PBX.
, config
ure internal numbers of POTS users,
a
al numbers blank, and click Next.
e page. Based on the data plan in step
, leave the registration groups and
ration.
es how to configure IAD208E(M).
IAD IP address (default: 192.168.100.1) in
(d f
lt
nd password (default: admin) and click
d
t)
nt page.
work Parameter and select the static IP
168.1.x (default IP address of the LAN
, set the subnet mask to 255.255.255.0,
gateway to 192.168.1.1.
> SIP Server and set the IP address of the
AN port on the EGW1530B (for example,
> FXS User and set User ID (indicating
n in step
5
5
Internal Number Example
6001
6002
6003
6004
...
d (d f
lt
d i )
.
a
a
d li k
Advertisement
Table of Contents
