First Connection - AAB TempSmart TS-100 User Manual

First Connection

Step One: On your smartphone, go to the Apple App Store or Google Play
and download the AAB Smart TS-100 app marked with an Orange icon .
Step Two: Connecting the TS-100 to the app.
Start by pressing the side buttons to open and turn on the TS-100. The LED will begin
blinking once a second for 30 seconds. This indicates that the unit is operating and the
battery is good. At the end of the first 30 seconds, the meter will go into standby mode
and will remain in standby mode as long as the meter is open. The meter can be
connected to at any time while in the standby mode without physical interaction.
Closing the meter turns it completely off.
Step Three: Connecting the TS-100 to the app.
Start the app by selecting TS-100 orange icon in the app list. After the opening
screen animation, choose "Open Meter and Tap Here To Connect".
4
DataLoggerStore
1.877.766.5412
www. .ca
Shop for Data Logging products online at: