Troubleshooting - AAB TempSmart TS-100 User Manual

Troubleshooting

PROBLEM
The TS-100 won't connect
*Slow temperature/humidity
response
Incorrect
temperature/humidity reading
Screw port doesn't work
Log doesn't show in email
• The TempSmart TS-100 was designed to mechanically shield the sensor while
closed and provide fast and accurate readings by exposing the sensors directly
to the air when opened. When moving the device from extreme temperature or
humidity conditions to another, it may require time to acclimate as with any
measurement device.
General Use
The TS-100 was designed for reading and logging temperature and humidity in order
to aid the contractor in effectively balancing commercial and residential HVAC
systems.
Shop for Data Logging products online at:
POSSIBLE CAUSE
Low battery
Bluetooth off
Out of range
Low air flow
Ports blocked
Low Battery
Meter acclimating
Ports blocked
Direct sunlight
Wrong thread size/type
Email service or anti-
virus program is
removing/stripping the
attachment
DataLoggerStore
www.
CORRECTION
Replace battery
Turn on phone's Bluetooth
Move closer to the device
Move into air stream
Remove obstruction from
front and/or rear ports
Replace battery
Give meter time to adjust to
current conditions
Remove obstruction from
front and/or rear ports
Move from direct sunlight
Ensure accessory has a
¼-20 threaded screw
Change settings in email or
anti-virus program or us
another email program
1.877.766.5412
.ca
12