Set Up And Basic Operations; Getting Ready To Switch On The Power; Making The Connections - Roland MMP-2 Owner's Manual

Set Up and Basic Operations

This chapter introduces the basic functions of the MMP-2 in the following order, which you should follow
in getting started with your new unit.
Getting Ready
to Switch on the Power
Read through this in sequence as you try things out for yourself.

Getting Ready to Switch on the Power

Making the Connections

fig.e.BasicConnect.eps
power
microphone
Refer to the figures and the following explanation to connect the equipment you're using.
fig.e.PowerConnect.eps
Connecting the Power Source
Use the included power cable to connect the unit with a power
source.
12
Switching on
the power
MMP-2
MMP-2
For information about digital connections, please read "Settings for Digital Connections" (p. 26).
To prevent problems, including malfunction and damage to speakers, turn the volume down
completely and turn off the power for all the devices being connected before making the
connections.
Global Adjusting
Functions the Input
Switching off
the power
recorder
MMP-2
rear panel
power cable